Компактные экскаваторы / Компактный экскаватор E80
Спецификации и опции
E80
Закрыть/открыть все PDF version
Operating weight with standard bucket, excluding operator
8,380 kg
Additional weight for long dipperstick
58 kg
Ground pressure with rubber tracks
38.2 kPa
(A)
Bucket pivot angle
182 °
(B)
Maximum reach of working equipment
6,965 mm
(B)
Maximum reach of working equipment, long dipperstick
7,480 mm
(C)
Maximum reach at ground level
6,765 mm
(C*)
Maximum reach at ground level, long dipperstick
7,295 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,500 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,700 mm
(E)
Maximum blade height
438 mm
(F)
Maximum blade depth
310 mm
(G)
Maximum height of working equipment with dipperstick retracted
5,019 mm
(H)
Maximum bucket tooth height
6,715 mm
(H*)
Maximum bucket tooth height, long dipperstick
7,070 mm
(I)
Maximum dump height
4,720 mm
(I*)
Maximum dump height, long dipperstick
5,085 mm
(J)
Maximum depth of vertical wall which can be excavated
3,220 mm
(J)
Maximum depth of vertical wall which can be excavated, long dipperstick
3,730 mm
(K)
Maximum digging depth
4,150 mm
(K*)
Maximum digging depth, long dipperstick
4,675 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
440 mm
(B)
Clearance, upper structure to ground line
737 mm
(C)
Ground line to top of engine cover
1,715 mm
(D)
Length of track on ground
2,200 mm
(E)
Machine centre line to blade
1,912 mm
(F)
Minimum radius in travel position
4,797 mm
(G)
Overall length of track assembly
2,823 mm
(H)
Overall length in travel position
6,167 mm
(H*)
Overall length in travel position, long dipperstick
6,260 mm
(I)
Track lug height
20 mm
(J)
Blade width
2,300 mm
(K)
Height
2,638 mm
(L)
Track width
450 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
655 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
803 mm
(O)
Minimum turning radius
2,500 mm
(P)
Swing clearance, rear
1,298 mm
(Q)
Working width at maximum right-hand rotation
2,450 mm
Make / model
Yanmar / 4TNV98-ZWDB8
Fuel
Diesel
Number of cylinders
4
Displacement
3,300 cm3
Maximum NET power (ISO 9249)
40.4 kW
Maximum torque at 1300 RPM
248 Nm
Pump type
One engine-driven tandem axial piston pump and one engine-driven gear pump
Piston pump capacity
144 L/min
Auxiliary flow
120 L/min
Auxiliary relief
210.0 bar
Digging force, dipperstick (ISO 6015)
40,900 N
Digging force, long dipperstick (ISO 6015)
34,100 N
Digging force, bucket (ISO 6015)
54,600 N
Drawbar pull
60,800 N
Travel speed, low range
2.9 km/h
Travel speed, high range
4.6 km/h
Boom swing, left
70 °
Boom swing, right
55 °
Slew rate
9.6 RPM
Cooling system
4.2 L
Engine lubrication plus oil filter
11.6 L
Fuel reservoir
110 L
Hydraulic reservoir
87 L
Hydraulic system
127 L
Noise level LpA(EU Directive 2006/42/EC)
77 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
98 dB(A)
- 2300 mm dozer blade
- 450 mm rubber tracks
- Engine/hydraulic monitor with shutdown
- Fingertip auxiliary hydraulic control
- Control console locks
- Hydraulic joystick controls
- Two-speed travel
- Lockable storage compartment
- Horn
- Work lights
- Retractable seat belt
- Suspension seat with high back
- Consoles with forwards/backwards adjustable displacement
- Boom and arm load holding valve
- Harness for rotating beacon
- Fully adjustable air conditioning
- Overload warning device
- Sun visor
- Left rear view mirror
- Electric refueling pump
- Auto idle
- Second auxiliary hydraulic line (Rotation piping)
- Auxiliary hydraulics (1st and 2nd circuits)
- Auxiliary lines on arm with quick couplers
- Warranty: 24 months, 2000 hours (whichever occurs first)
- Steel tracks
- Third auxiliary hydraulic line (Clamshell Piping)
- Long dipperstick