Телескопические манипуляторы / Телескопический манипулятор T35.130S
Спецификации и опции
T35130S IIIB
Закрыть/открыть все PDF version
Complies with stability test EN1459 Annex B
Complies with stability test EN1459 Annex B
(-)
Operator cab inside width
857 mm
(A)
Overall length (with forks)
7,081 mm
(B)
Overall length (fork frame)
5,876 mm
(C)
Overall length (without attachment carriage)
5,850 mm
(D)
Overall length (Front tire to rear of machine)
4,497 mm
(E)
Overall height (with rotating beacon)
2,586 mm
(F)
Overall height
2,393 mm
(G)
Carriage rotation angle
124 °
(I)
Height to back of the machine
1,869 mm
(J)
Ground clearance
422 mm
(L)
Front axle to front carriage
1,919 mm
(M)
Wheelbase
2,850 mm
(N)
Rear axle to back of machine
1,107 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,992 mm
(Q)
Width over standard tyres
2,418 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,696 mm
(S)
External turning radius (at tyres)
4,150 mm
(U)
Internal turning radius
1,519 mm
Load Charts
Complies with stability test EN1459 Annex BLoad Charts
Complies with stability test EN1459 Annex B- Air conditioning
- Back up alarm
- Boom stop
- Boom wiring harness and electric connectors
- Cold weather starting
- Custom colour
- Cyclonic air prefilter
- Drawbar coupler tow hitch with rear electric socket
- Fire extinguisher
- Forward/Reverse control on Steering Wheel Lever (no longer on joystick)
- Keyless ignition (start/stop with keypad)
- Lockable fuel cap
- Loudspeaker & radio ready
- Manitou carriage with hydraulic attachment lock (boom wiring harness mandatory)
- Manitou carriage with manual attachment lock
- Pintle tow hitch and rear electric socket
- Proportional engine fan with inverter
- Protective grill for windshield and roof window
- PVC Document holder
- Quicktach carriage with hydraulic attachment lock (boom wiring harness mandatory)
- Rear flat mirror
- Remote control system with on-board charger
- Roof window wiper
- Rotating beacon
- Sears air suspension seat
- Standard engine ignition (with key) with additional keypad security
- Sun visor
- Support for vehicle registration plate
- Wheel wedge
- Work light on boom
Lifting height — on stabilisers
12,468 mm
Lifting height — on tyres
11,658 mm
Rated capacity
3,500 kg
Capacity (at max. height on stabilisers)
3,500 kg
Capacity (at max. height on tyres)
500 kg
Capacity (at max. reach on stabilisers)
1,300 kg
Capacity (at max. reach on tyres)
400 kg
Max. reach on tyres
8,764 mm
Crowding force
12,300 daN
Weight (unladen)
8,720 kg
Standard tyres
BASIC TYRES 405/70-20 16PR
1st gear / low range
7 km/h
1st gear / high range
26 km/h
Low speed (forward/reverse) with 24" tyres
8.5 km/h
High speed (forward/reverse) with 24" tyres
30 km/h
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Make / Model
DEUTZ / TCD 3.6 L4
Fuel
Diesel
Cooling
Liquid
Rated power (ISO 14396:2002) at 2300 RPM:
100 HP
Rated power (ISO 14396:2002) at 2300 RPM:
74.4 kW
Maximum torque at 1600 RPM:
410 Nm
Number of cylinders
4
Displacement
3.6 L
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
255 bar
Lift time - no load
12.8 s
Lower time - no load
8.4 s
Telescope in time at max. reach - no load
11.5 s
Telescope in time at max. height - no load
10.3 s
Telescope out time at max. reach - no load
17 s
Telescope out time at max. height - no load
17 s
Engine braking
Hydrostatic
Parking and emergency brake
Negative brake with hydraulic command
Fuel tank
145 L
Hydraulic reservoir
76 L
Operator noise level (LpA) (EN 12053)
76 dB(A)
Operator noise level (LpA) (EN 12053) uncertainty
4 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (EN 13059)
1.4 ms-2
Whole body vibration uncertainty (EN 13059)
0.4 ms-2
Некоторые данные основаны на инженерных расчетах, а не на результатах измерений. Данные приведены только для целей сравнения и могут быть изменены без предварительного уведомления. Технические данные вашей машины Bobcat могут варьироваться в соответствии с обычными изменениями, которые могут быть внесены в конструкцию или технологию изготовления, а также в соответствии с условиями работы и другими факторами.