Telescopic Handlers / T35.130SLP Telescopic Handler
Specifications & Options
T35130SL IIIB
Close / Open all PDF version
Complies with stability test EN1459 Annex B
Complies with stability test EN1459 Annex B
(-)
Operator cab inside width
857 mm
(A)
Overall length (with forks)
7,081 mm
(B)
Overall length (fork frame)
5,876 mm
(C)
Overall length (without attachment carriage)
5,850 mm
(D)
Overall length (Front tire to rear of machine)
4,497 mm
(E)
Overall height (with rotating beacon)
2,586 mm
(F)
Overall height
2,393 mm
(G)
Carriage rotation angle
124 °
(I)
Height to back of the machine
1,869 mm
(J)
Ground clearance
422 mm
(L)
Front axle to front carriage
1,919 mm
(M)
Wheelbase
2,850 mm
(N)
Rear axle to back of machine
1,107 mm
(O)
Operator cab outside width
930 mm
(P)
Track width (front & rear)
1,992 mm
(Q)
Width over standard tyres
2,418 mm
(R)
External turning radius (with forks spaced 1040 mm apart)
5,696 mm
(S)
External turning radius (at tyres)
4,150 mm
(U)
Internal turning radius
1,519 mm
Load Charts
Complies with stability test EN1459 Annex BLoad Charts
Complies with stability test EN1459 Annex B- Air conditioning
- Back up alarm
- Boom stop
- Boom wiring harness and electric connectors
- Cold weather starting
- Custom colour
- Cyclonic air prefilter
- Drawbar coupler tow hitch with rear electric socket
- Fire extinguisher
- Forward/Reverse control on Steering Wheel Lever (no longer on joystick)
- Keyless ignition (start/stop with keypad)
- Lockable fuel cap
- Loudspeaker & radio ready
- Manitou carriage with hydraulic attachment lock (boom wiring harness mandatory)
- Manitou carriage with manual attachment lock
- Pintle tow hitch and rear electric socket
- Proportional engine fan with inverter
- Protective grill for windshield and roof window
- PVC Document holder
- Quicktach carriage with hydraulic attachment lock (boom wiring harness mandatory)
- Rear flat mirror
- Remote control system with on-board charger
- Roof window wiper
- Rotating beacon
- Sears air suspension seat
- Standard engine ignition (with key) with additional keypad security
- Sun visor
- Support for vehicle registration plate
- Wheel wedge
- Work light on boom
Lifting height — on stabilisers
12,468 mm
Lifting height — on tyres
11,746 mm
Rated capacity
3,500 kg
Capacity (at max. height on stabilisers)
3,500 kg
Capacity (at max. height on tyres)
2,500 kg
Capacity (at max. reach on stabilisers)
1,300 kg
Capacity (at max. reach on tyres)
400 kg
Max. reach on tyres
8,764 mm
Crowding force
12,300 daN
Weight (unladen)
8,830 kg
Standard tyres
BASIC TYRES 405/70-20 16PR
1st gear / low range
7 km/h
1st gear / high range
26 km/h
2nd gear / low range
8.5 km/h
2nd gear / high range
30 km/h
Transmission
Hydrostatic with electronic regulation
Main drive
Hydrostatic motor
Make / Model
DEUTZ / TCD 3.6 L4
Fuel
Diesel
Cooling
Liquid
Rated power (ISO 14396:2002) at 2300 RPM
100 HP
Rated power (ISO 14396:2002) at 2300 RPM
74.4 kW
Maximum torque at 1400 RPM
410 Nm
Number of cylinders
4
Displacement
3.6 L
Pump type
Gear pump with LS valve
Pump capacity
100 L/min
Relief valve pressure setting
255 bar
Lift time - no load
12.8 s
Lower time - no load
8.4 s
Telescope in time at max. reach - no load
11.5 s
Telescope in time at max. height - no load
10.3 s
Telescope out time at max. reach - no load
17 s
Telescope out time at max. height - no load
17 s
Engine braking
Hydrostatic
Parking and emergency brake
Negative brake with hydraulic command
Fuel tank
145 L
Hydraulic reservoir
76 L
Operator noise level (LpA) (EN 12053)
76 dB(A)
Operator noise level (LpA) (EN 12053) uncertainty
4 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (EN 13059)
1.4 ms-2
Whole body vibration uncertainty (EN 13059)
0.4 ms-2
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.