T590 Compact Tracked Loader
Specifications & Options
T590
Close/Open all PDF version
Tipping load (ISO 14397-1)
2,773 kg
Rated operating capacity (ISO 14397–1)
971 kg
Pump capacity
64.7 L/min
Pump capacity (with high flow option)
101.1 L/min
System relief at quick couplers
23.8-24.5 MPa
Max. travel speed (high range – optional)
16 km/h
Make / Model
Bobcat 2.4L, 97/68 EC
Compliancy
Stage V
Fuel
Diesel
Cooling
Liquid
Power at 2600 RPM (ISO 14396)
50.7 kW
Torque at 1800 RPM (ISO 14396)
252.3 Nm
Number of cylinders
4
Displacement
2,392 cm3
Fuel tank
138.2 L
Operating weight
3,664 kg
Shipping weight
3,283 kg
Ground pressure
40 kPa
(A)
Operating height
3,901 mm
(B)
Height with operator cab
1,972 mm
(C)
Angle of departure
27.8 °
(D)
Ground clearance
188 mm
(E)
Ground contact length
1,402 mm
(F)
Length without attachment
2,657 mm
(G)
Length with standard bucket
3,378 mm
(H)
Rollback at ground position
30 °
(I)
Dump height with standard bucket
2,319 mm
(J)
Height to bucket hinge pin
3,023 mm
(K)
Dump reach at maximum height
887 mm
(L)
Dump angle at maximum height
42 °
(M)
Rollback fully raised at maximum height
97 °
(N)
Bucket width, 68–inch
1,727 mm
(N*)
Bucket width, 74–inch
1,880 mm
(O)
Turning radius with standard bucket
2,032 mm
(Q)
Width over tracks, 320 mm tracks
1,702 mm
(Q*)
Width over tracks, 400 mm tracks
1,782 mm
Vehicle steering
Hand Levers or optional Selectable Joystick Controls (SJC)
Loader hydraulics tilt and lift
Foot Pedals or optional Selectable Joystick Controls (SJC)
Front auxiliary (standard)
Proporcional switch on Hand Levers or optional Selectable Joystick Controls (SJC)
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
- Bobcat Interlock Control System (BICS)
- Parking brake
- Deluxe operator cab* Includes interior cab foam, side, top and rear windows, Deluxe wire harness, dome light and electrical power port (1)
- Noise reduction kit
- Operating lights, front and rear
- Deluxe instrument panel
- Keyless start with password capability
- Suspension seat
- Seat belt
- Seat bar
- Hydraulic bucket positioning (including ON/OFF switch)
- Tracks — rubber — 320 mm
- Spark Arrester
- Bob-Tach™ frame
- Cushioned lift and tilt cylinders
- Lift arm support
- Engine/hydraulics system shutdown
- Automatically activated glow plugs
- Electrically activated proportional front auxiliary hydraulics
- Auxiliary hydraulics: variable flow/maximum flow
- Machine IQ (telematic)
- Manual
- CE certification
- Warranty: 24 months or 2000 hours (whichever occurs first)
(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I
- Factory Options
- Deluxe pressurized cab with heating
- Deluxe pressurized cab with HVAC
- Selectable Joystick Controls (SJC - R/C Ready)
- Tracks - rubber - 400 mm
- Cloth Suspension Seat
- High-flow auxiliary hydraulics
- 7-pin attachment control
- 2 Speed
- Power Bob-Tach™
- Back-up alarm
- Radio
- Beacon
- Work Lights LED
- Road Option
- Automatic Ride Control
- Automatic Reversing Fan
- Custom paint color (min order of 5 units)
- Dealer Installed Options
- Cab enclosure kit
- Special applications front door kit
- 200 lbs (74.4 kg) counterweight kit
- Front axle counterweight kit
- Fuel cap locking kit
- Deluxe instrument panel
- Replacement Bob-Tach™
- Fresh air heater kit
- Front door kit
- Door sensor kit
- Plumbing kit for fresh air heater
- Back up alarm kit
- FOPS kit **
- Single-point lift kit
- Power Bob-Tach™ kit
- Operator cab, CE, enclosure kit
- 7-pin attachment control
- Four-point lift kit
- Rear auxiliary hydraulic kit
- Engine block heater kit
- Road kit
- Bucket positioning kit
- Keyless kit
- Rear window wiper kit
- 14-pin attachment control kit
- 4-Way flasher kit
- 80 mm Suspension seat kit
- Cup holder kit
- Headlight guard kit
- Muffler guard kit
- Tail light guard kit
- Auger Accessories
- Augers
- Backhoes
- Bale Forks
- Box Blades
- Breaker Accessories
- Breakers
- Brush Saws
- Brushcat™ Rotary Cutters
- Combination Buckets
- Concrete Mixers
- Concrete Pumps
- Construction / Industrial Buckets
- Diggers
- Dozer Blades
- Drop Hammers
- Dumping Hoppers
- Flail Cutters
- Forestry Cutters
- Graders
- Grapples, Industrial
- Landplanes
- Landscape Rakes
- Laser Equipment
- Low Profile Buckets
- Miscellaneous
- Mixing Buckets
- Mowers
- Pallet Fork Accessories
- Pallet Forks, Hydraulic
- Planer Accessories
- Planers
- Rear Stabilizers
- Remote Control
- Root Grapples
- Rotary Grinders
- Sand Cleaners
- Scarifiers
- Scrapers
- Seeders
- Skeleton Buckets
- Snow Blades
- Snow Pushers
- Snow V-Blades
- Sod Layers
- Soil Conditioners
- Spreader
- Spreaders
- Stump Grinders
- Sweepers
- Tillers
- Tilt-Tatch
- Tree Transplanters
- Trench Compactors
- Trenchers
- Utility Forks
- Utility Frames
- Vibratory Rollers
- Wheel Saws
- Wood Chippers
Operator LpA (98/37 & 474-1)
82 dB(A)
Noise level LWA (EU Directive 2000/14/EC)
101 dB(A)
Whole body vibration (ISO 2631–1)
0.8 ms-2
Hand-arm vibration (ISO 5349–1)
2.3 ms-2
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.