Loaders / S450 Skid-Steer Loader
Specifications & Options
European Specifications
S450
Close/Open all PDF version
Tipping load (ISO 14397-1)
1,308 kg
Rated operating capacity (ISO 14397-1)
654 kg
Pump capacity
63.2 L/min
Push Force
1,866 daN
System relief at quick couplers
22.4-23.1 MPa
Max. travel speed (high range - option)
14.8 km/h
Max. travel speed (low range)
11.4 km/h
Make / Model
Bobcat 2.4L, 97/68 EC Stage V
Fuel
Diesel
Cooling
Liquid
Power at 2600 RPM (ISO 14396)
36.5 kW
Torque at 1800 RPM (ISO 14396)
182.2 Nm
Number of cylinders
4
Displacement
2,393 cm3
Fuel tank
53.8 L
Operating weight
2,436 kg
Shipping weight
2,221 kg
(A)
Operating height
3,558 mm
(B)
Height with operator cab
1,976 mm
(C)
Angle of departure
23 °
(D)
Ground clearance
214 mm
(E)
Wheelbase
900 mm
(F)
Length without attachment
2,499 mm
(G)
Length with standard bucket
3,172 mm
(H)
Rollback at ground position
26 °
(I)
Dump height with standard bucket
2,157 mm
(J)
Height to bucket hinge pin
2,781 mm
(K)
Dump reach at maximum height
587 mm
(L)
Dump angle at maximum height
40 °
(M)
Rollback fully raised at maximum height
91 °
(N)
Width over standard bucket
1,575 mm
(O)
Turning radius with standard bucket
1,940.6 mm
Vehicle steering
Hand Levers or optional Selectable Joystick Controls (SJC)
Loader hydraulics tilt and lift
Foot Pedals or optional Selectable Joystick Controls (SJC)
Front auxiliary (standard)
Proporcional switch on Hand Levers or optional Selectable Joystick Controls (SJC)
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
- Bobcat Interlock Control System (BICS)
- Parking brake
- Deluxe operator cab* Includes interior cab foam, side, top and rear windows, Deluxe wire harness, dome light and electrical power port (1)
- Noise reduction kit
- Operating lights, front and rear
- Deluxe instrument panel
- Keyless start with password capability
- Suspension seat
- Seat belt
- Seat bar
- 10 x 16.5, 10–ply, Heavy duty tyres
- Bob-Tach™ frame
- Cushioned lift and tilt cylinders
- Lift arm support
- Engine/hydraulics system shutdown
- Spark Arrester
- Automatically activated glow plugs
- Electrically activated proportional front auxiliary hydraulics
- Auxiliary hydraulics: variable flow/maximum flow
- Machine IQ (telematic)
- Manual
- CE certification
- Warranty: 24 months or 2000 hours (whichever occurs first)
(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I
- Factory Options
- Deluxe pressurized cab with heating
- Deluxe pressurized cab with HVAC
- Selectable Joystick Controls with 2 Speed (SJC - R/C Ready)
- Cloth Suspension Seat
- 10 x 16.5, 10–ply, Versatile duty tyres
- 31 x 10 - 20, Industrial duty tyres
- 10 x 16.5, 10–ply, Severe duty tyres
- Hydraulic bucket positioning (including ON/OFF switch)
- Power Bob-Tach™
- Radio
- Strobe
- Back-up alarm
- Beacon
- Work Lights LED
- Road Option
- Custom paint color (min order of 5 units)
- Dealer Installed Options
- Rear Camera with Display kit
- Ride control
- Cab enclosure kit
- Special applications front door kit
- 200 lbs (74.4 kg) counterweight kit
- Front axle counterweight kit
- Fuel cap locking kit
- Deluxe instrument panel
- Replacement Bob-Tach™
- Fresh air heater kit
- Front door kit
- Door sensor kit
- Plumbing kit for fresh air heater
- Back up alarm kit
- FOPS kit **
- Single-point lift kit
- Power Bob-Tach™ kit
- Operator cab, CE, enclosure kit
- 7-pin attachment control
- Four-point lift kit
- Rear auxiliary hydraulic kit
- Engine block heater kit
- Road kit
- Bucket positioning kit
- Keyless kit
- Rear window wiper kit
- 14-pin attachment control kit
- 4-Way flasher kit
- 80 mm Suspension seat kit
- Cup holder kit
- Headlight guard kit
- Muffler guard kit
- Tail light guard kit
- Auger Accessories
- Augers
- Backhoe Accessories
- Backhoes
- Bale Forks
- Boring Units
- Box Blades
- Breaker Accessories
- Breakers
- Brush Saws
- Brushcat™ Rotary Cutters
- Combination Buckets
- Concrete Mixers
- Concrete Pumps
- Construction / Industrial Buckets
- Diggers
- Dozer Blades
- Drop Hammers
- Dumping Hoppers
- Flail Cutters
- Forestry Cutters
- Graders
- Grapples, Industrial
- Landplanes
- Landscape Rakes
- Laser Equipment
- Low Profile Buckets
- Miscellaneous
- Mixing Buckets
- Mowers
- Pallet Fork Accessories
- Pallet Forks, Hydraulic
- Pallet Forks, Standard
- Planer Accessories
- Planers
- Rear Stabilizers
- Remote Control
- Root Grapples
- Rotary Grinders
- Sand Cleaners
- Scarifiers
- Scrapers
- Seeders
- Silt Fence Installers
- Skeleton Buckets
- Snow Blades
- Snow Pushers
- Snow V-Blades
- Sod Layers
- Soil Conditioners
- Spreader
- Spreaders
- Steel Tracks
- Stump Grinders
- Sweepers
- Tillers
- Tilt-Tatch
- Tree Transplanters
- Trench Compactors
- Trenchers
- Utility Forks
- Utility Frames
- Vibratory Rollers
- Wheel Saws
- Wood Chippers
Operator LpA(98/37 & 474-1)
86 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
98 dB(A)
Whole body vibration (ISO 2631–1) High speed
0.8 ms-2
Whole body vibration uncertainty
0.4 ms-2
Hand-arm vibration (ISO 5349–1) High speed
1.3 ms-2
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.