S70 Skid-Steer Loader
Specifications & Options
S70
Close/Open all PDF version
Tipping load (ISO 14397-1)
686 kg
Rated operating capacity (ISO 14397-1)
344 kg
Pump capacity
37 L/min
System relief at quick couplers
20.7 MPa
Max. travel speed (low range)
9.8 km/h
Make / Model
Kubota / D1005-E4B-BC-3
Fuel
Diesel
Cooling
Liquid
Power at 2400 RPM
17.5 kW
Torque at 1425 RPM (SAE J1995 Gross)
62.8 Nm
Number of cylinders
3
Displacement
1,001 cm3
Fuel tank
24.6 L
Fuel consumption
2.84 l/h (Estimated fuel consumption is based on testing by Bobcat Company in high duty-cycle digging applications.)
Operating weight
1,268 kg
Shipping weight
1,109 kg
(A)
Operating height
3,051 mm
(B)
Height with operator cab
1,814 mm
(C)
Angle of departure
25 °
(D)
Ground clearance
141 mm
(E)
Wheelbase
722 mm
(F)
Length without attachment
1,925 mm
(G)
Length with standard bucket
2,472 mm
(H)
Rollback at ground position
22 °
(I)
Dump height with standard bucket
1,934 mm
(J)
Height to bucket hinge pin
2,399 mm
(K)
Dump reach at maximum height
400 mm
(L)
Dump angle at maximum height
34 °
(M)
Rollback fully raised at maximum height
97 °
(N)
Width over standard bucket
914 mm
(O)
Turning radius with standard bucket
1,557 mm
(P)
Track, standard tyres
752 mm
(Q)
Width over standard tyres
901 mm
Vehicle steering
Direction and speed controlled by two hand levers
Loader hydraulics tilt and lift
Separate foot pedals
Front auxiliary (standard)
Lateral movement of right-hand steering lever
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
- Automatically activated glow plugs
- Bob-Tach™ frame
- Back-up alarm
- Bobcat Interlock Control System (BICS)
- Front auxiliary hydraulics
- Suspension seat
- Manual
- Lift arm support
- 23 x 5.70-12, 4–ply, Narrow tyres
- Operating lights, front and rear
- Operator cab (1)
- Parking brake
- Rear and top window
- Seat belt
- Seat bar
- Spark arrestor muffler
- CE certification
- Warranty: 24 months or 2000 hours (whichever occurs first)
(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471
- Factory Options
- Deluxe pressurized cab with heating
- 23 x 8.50-12 6-ply, heavy duty tyres
- Dealer Installed Options
- 7 and 14-pin electrical attachment control kit
- Back up alarm kit
- Cab enclosure kit
- Fresh air heater kit
- Catalytic purifier kit
- Front door kit
- Engine block heater kit
- Externally removable rear window
- Fire extinguisher kit
- Hydraulic bucket positioning kit
- Keyless kit
- Fuel cap locking kit
- Rear stabiliser kit
- Rear window wiper kit
- Replacement operator cab structure
- Seat belt kit
- Side windows kit
- Single-point lift kit
- Special applications front door kit
- Tailgate lock kit
- 4-way flasher / rotating beacon / strobe
- Water level sensor kit
- Auger Accessories
- Augers
- Boring Units
- Breaker Accessories
- Breakers
- Dozer Blades
- Dumping Hoppers
- Grapples, Industrial
- Landplanes
- Miscellaneous
- Pallet Fork Accessories
- Pallet Forks, Standard
- Root Grapples
- Soil Conditioners
- Stump Grinders
- Sweepers
- Tillers
- Utility Forks
Operator LpA(98/37 & 474-1)
86 dB(A)
Operator LpA uncertainty
2.5
Noise level LWA(EU Directive 2000/14/EC)
97 dB(A)
Noise level LWA uncertainty
Whole body vibration (ISO 2631–1)
1.3 ms-2
Whole body vibration uncertainty
Hand-arm vibration (ISO 5349–1)
1.5 ms-2
Hard-arm vibration uncertainty
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.