Loaders / S100 Skid-Steer Loader
Specifications & Options
S100
Close/Open all PDF version
Tipping load (ISO 14397-1)
915 kg
Rated operating capacity (ISO 14397-1)
457 kg
Pump capacity
36 L/min
Push Force
1,275 daN
System relief at quick couplers
20.7 MPa
Max. travel 2-speed (SJC controls)
13.4 km/h
Max. travel 1 speed (manual controls)
8.2 km/h
Make / Model
Kubota / V1505-T4F-ST5
Cooling
Liquid
Maximum power at 2300 RPM (ISO 14396)
18.2 kW
Torque at 1600 RPM (ISO 9249) Gross
86.4 Nm
Number of cylinders
4
Displacement
1,498 cm3
Fuel tank
45 L
Fuel consumption
4.4 l/h (Estimated fuel consumption is based on testing by Bobcat Company in mid duty-cycle digging applications.)
Operating weight (with HD tyres, 50 inch C/I bucket)
1,860 kg
Shipping weight (with HD tyres, without bucket)
1,693 kg
Operating weight (with SOLID tyres, 50 inch C/I bucket)
2,149 kg
Shipping weight (with SOLID tyres, without bucket)
2,074 kg
(A)
Operating height
3,306 mm
(B)
Height with operator cab
1,878 mm
(C)
Angle of departure
25 °
(D)
Ground clearance
167 mm
(E)
Wheelbase
818 mm
(F)
Length without attachment
2,262 mm
(G)
Length with standard bucket
2,800 mm
(H)
Rollback at ground position
26 °
(I)
Dump height with standard bucket
2,084 mm
(J)
Height to bucket hinge pin
2,633 mm
(K)
Dump reach at maximum height
412 mm
(L)
Dump angle at maximum height
43 °
(M)
Rollback fully raised at maximum height
95 °
(N)
Width over standard bucket
1,270 mm
(O)
Turning radius with standard bucket
1,731 mm
(P)
Track, standard tyres
967 mm
(Q)
Width over standard tyres
1,167 mm
Vehicle steering
Direction and speed controlled by two hand levers
Loader hydraulics tilt and lift
Separate foot pedals
Front auxiliary (standard)
Lateral movement of right-hand steering lever
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
- Bobcat Interlock Control System (BICS)
- Hand and Foot Controls
- Operator cab Deluxe (1)
- Standard Seat
- Seat belt
- Seat bar
- Bob-Tach™ frame
- 27 x 8.50-15, 6–ply, Bobcat heavy duty tyres
- Auxiliary hydraulics: variable flow/maximum flow
- Operating lights, front and rear
- Lift arm support
- Parking brake
- Spark arrestor muffler
- Engine/hydraulics system shutdown
- Automatically activated glow plugs
- Manual
- Warranty: 24 months or 2000 hours (whichever occurs first)
(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I. Cab Deluxe includes Interior cab foam, top and rear windows, deluxe wire harness, domelight and electrical power port.
- Factory Options
- Selectable Joystick Controls (SJC)
- Two speed with 3-point belt
- Deluxe pressurized cab with heating
- Cloth Suspension Seat
- Vinyl Suspension Seat
- Keyless start with password capability
- Power Bob-Tach™
- Hydraulic bucket positioning (including ON/OFF switch)
- Back-up alarm
- 28x9-15 Hard Duty Solid Tyres
- Road kit
- Beacon
- Dealer Installed Options
- Cab enclosure kit
- Lexan rear window kit
- Counterweights
- Side windows kit
- Top window kit Lexan
- Front door kit
- Lexan door kit
- Special applications front door kit
- Counterweight kit
- Single-point lift kit
- Hydraulic bucket positioning kit
- Power Bob-Tach™ kit
- Back up alarm kit
- Fire extinguisher kit
- Fresh air heater kit
- Plumbing kit for fresh air heater
- Rear window wiper kit
- Warning lights: rotating beacon, strobe light
- Seat belt kit
- Third gas spring kit (for heated cab)
- Additional gas spring kit (for tipping the cab)
- Tailgate lock kit
- Fuel cap locking kit
- FOPS kit
- Auger Accessories
- Augers
- Bale Forks
- Breaker Accessories
- Breakers
- Brush Saws
- Brushcat™ Rotary Cutters
- Combination Buckets
- Construction / Industrial Buckets
- Dumping Hoppers
- Grapples, Industrial
- Landplanes
- Low Profile Buckets
- Miscellaneous
- Mowers
- Pallet Fork Accessories
- Planer Accessories
- Rear Stabilizers
- Remote Control
- Root Grapples
- Scrapers
- Skeleton Buckets
- Snow Blades
- Soil Conditioners
- Sweepers
- Tillers
- Utility Forks
- Utility Frames
Noise level LpA(EU Directive 2006/42/EC)
86 dB(A)
Operator LpA uncertainty
2 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
96 dB(A)
Noise level LWA uncertainty
Hard-arm vibration uncertainty
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.